• True RMS can measure and indicate distorted waveforms
• 6040 counts with Bar Graph display
• MIN/MAX function enables to record min & max value
• REL(relative value) function to indicate the measurement variation
| DC V |
600.0mV/6.000/60.00/600.0/600V
(Input Impedance: 10MΩ, 100MΩ only 600mV) ±0.5%±2dgt (600.0mV/6.000/60.00/600.0V) ±0.8%±3dgt (600V) |
| AC V |
6.000/60.00/600.0/600V
(Input Impedance: 10MΩ) ±1.5%±5dgt
(6.000V) ±1.2%±3dgt (60.00/600.0V) ±1.5%±5dgt (600V) |
| DC A |
600/6000µA/60/600mA/6/10A ±1.2%±3dgt (600/6000µA/60/600mA) ±2.0%±5dgt (6/10A) |
| AC A |
600/6000µA/60/600mA/6/10A ±1.5%±4dgt (600/6000µA/60/600mA) ±2.2%±5dgt (6/10A) |
| Ω |
600Ω/6/60/600kΩ/6/60MΩ ±1.0%±2dgt
(600Ω/6/60/600kΩ/6MΩ) ±2.0%±3dgt (60MΩ) |
| Continuity buzzer |
0 - 600Ω (Buzzer sounds below 100Ω) |
| Diode test |
2.8V Release Voltage:Approx. 0.4mA Test Current |
| Capacitance |
40/400nF/4/40/400/4000µF |
| Frequency |
10/100/1000Hz/10/100/1000kHz/10MHz |
| DUTY |
0.1 - 99.9% (Pulse width/Pulse period) ±2.0%±2dgt (- 10kHz) |
| Applicable standards |
IEC 61010-1 CAT III 300V Pollution degree 2
IEC 61010-1 CAT II 600V Pollution degree 2
IEC 61010-031
IEC 61326 |
| Display |
6040 Counts |
| Power source |
R6 (1.5V) × 2 (Auto-power-OFF within 15 minutes) |
| Dimensions |
161(L) × 82(W) × 50(D)mm |
| Weight |
Approx. 280g |
| Included Accessories |
7066A (Test leads)
0.8A/600V (Ceramic Fuse) × 1built-in
10A/600V (Ceramic Fuse) × 1built-in
R6 × 2
Instruction Manual |
| Optional Accessories |
7234 (Crocodile clip test lead)
9095 (Carrying case)
Edited by Mina
|
