New NDT310 Digital Ultrasonic Thickness Gauge Meter Tester Wall Thickness Meter 0.75mm-300.0mm 0.03inch 11.8inch
Product Introduction:
1. Using the latest high-performance, low-power microprocessor technology;
2. You can measure the thickness of metal, glass, ceramics and other materials, and the materials were measured speed of sound;
3. widely used in a variety of sheet metal, pipe wall thickness, vessel wall thickness of boilers, pressure vessels and piping of various thickness measurement;
4. Monitoring the extent they are subject to corrosion after the thinning during use.
Main features:
1. For the measurement of metal (such as steel, cast iron, aluminum, copper, etc.) thickness, plastics, ceramics, glass, glass fiber, and any other good conductor of ultrasonic
2. Can be equipped with a variety of different frequencies, different chip sizes duals use
3. With the probe zero calibration, two-point calibration function, the system can automatically correct errors
The speed of sound is known thickness can be counter-measure to improve the measurement accuracy
5. Has the coupling state prompts
6. LED backlit display for easy use in dimly lit environments
7. The remaining charge indicator, real-time display remaining battery charge
8. With automatic sleep, automatic shutdown and other power-saving features
9. compact, high portability, reliability, suitable for harsh operating environment, anti-vibration, shock and electromagnetic interference.
Detailed parameters:
1. Measuring range: 0.75 ~ 300mm (probe decision)
2. Resolution force: 0.1mm /0.01mm optional
3. Measuring unit: metric and imperial selectable
4. Accuracy: (0.5% H + 0.04) mm H is the actual thickness of the measured object
5. adjust the speed of sound: 1000 ~ 9999 m / s
6. Data storage: 500 data values stored reading, viewing and deleting
7. The minimum thickness capturing capability: the ability to capture value having a minimum thickness
8. The surface temperature: -10 ~ 60 C
9. Measuring cycle: single-point measurement 4 times / sec, scan mode 20 times / sec
10. Pipe measurement limit: Φ20 mm × 3.0 mm (5Mhz probe); Φ15 mm × 2.0 mm (7Mhz probe) shows the error does not exceed 0.1 mm
11. Calibration: 4.0 mm (steel)
12. Probe Specifications: Φ6 mm (optional) Φ10 mm (optional) Φ12 mm (optional)
13. Power Source: AA-size alkaline batteries 1.5V (2 )
14. Operating time: up to 250 hours of continuous operation (without backlight)
15. Dimensions: 150 × 74 × 32 mm
16. Weight: 238g.
more disount,welcome to consult us
the more you order,the greater the discount
