Car Paint Tester CM-8856FN
1 It meets the standards of both ISO2178 and ISO 2361 as well as DIN, ASTM and BS. It can be used both in the laboratory and in harsh field conditions.
2 The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminum , chrome etc.) on magnetic materials (e.g. iron, nickel etc.). often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminum tile, some alloy tile, paper etc.
3 The N probes measure the thickness of non-magnetic coating,sonnon-magnetic metic metals. It is used on anodizing, varnish, paint, enamel,plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.
4 Automatic substrate recognition.
5 Manual or automatic shut down.
6 Two measurement mode: Single and Continuous
7 Wide measuring range and high resolution.
8 Metric/Imperial conversion.
9 Digital backlit display gives exact reading with no guessing or errors.
10 Can communicate with PC computer for statistics and printing
11 Can store 99 groups of measurements
12 Statistics is available,display Max,Min and Ave value
II.Parameters:
Display: 4 digits LCD, backlit
Range: 0-1250 um/0~50mil (other ranges can be specified )
Min.radius workpiece: F: Convex 1.5mm/Concave 25mm
N: Convex 3mm/ Concave 50mm
Min. measuring area: 6mm
Min.Sample thickness : 0.3mm
Resolution: 0.1um (0-99.9 um); 1 um (over 100 um)
Accuracy: 1-3%n or 2.5 um or 0.1mil(Whichever is the greater)
Bttery Indicator: Low batter indicator.
PC interface: with RS-232C interface
Power supply: 2 1.5 AAA(UM-4) battery
Operating condition: Temp. 0~50.
Humidity <95% .
Size: 126x65x35 mm ( 5.0x2.6x1.6 inch)
Weight: about 81g(not including batteries
Standard accessories:
Carrying case 1 pc.
Operation manual 1 pc.
F probe in built 1 pc.
NF probe in built 1 pc.
Calibration foils 1set/4pcs.
Substrate (Iron) 1 pc.
Substrate (Aluminium) 1 pc.
Optional:Usb cable & software(Please contact us,if you need the Optional part)
| Spec: |
The F probes measure the thickness of non-magnetic materials on magnetic materials. The N probes measure the thickness of non-conductive coatings on non-magnetic metals. |
Car paint tester CM6560 Coating Thickness Tester
Features
* Can store the new data in 99 groups.
* Two measuring methods: magnetic induction (F) and eddy current (N)
* Two measurement mode: Single and Continuous(Notice:Continuous mode is convenient to measure the coating thickness of curved objects and tiny objects.)
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
* Separate Type can provide several type probe, measure can be more flexibility.
| Principles |
Applications |
Examples |
F Type
Magnetic Induction
(Iron Base) |
Measure the thickness of non-magnetic materials on magnetic materials |
Galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc |
NF Type
Eddy Current
(Aluminium Base) |
Measure the thickness of non-conductive coatings on non-magnetic metals |
Anodizing, varnish, paint, enamel, plastic coatings, powder, etc. Applied to aluminum, brass, non-magnetic stainless steel, etc |
|
Principle
|
F Magnetic Induction&NF Type Eddy Current
|
|
Range
|
0~1250µm/0~50mil
|
|
Resolution
|
0.1µm/1µm
|
|
Accuracy
|
±1~3%nor±2.5µm
|
|
Min.Radius Workpiece
|
F Type:convex 1.5mm/concave 25mm
NF Type:convex 3mm/concave 50mm
|
|
Min.Measuring Area
|
6mm
|
|
Min.Sample Thickness
|
0.3mm
|
|
Data Memory
|
99 Groups
|
|
Metric/Imperial
|
√
|
|
Battery Indicator
|
√
|
|
Automatic Power Off
|
√
|
|
Operating Conditions
|
Tempersture
|
0~40ºC
|
|
Humidity
|
10~90%RH
|
|
Power Supply
|
2x1.5V AAA(UM-4)Battery
|
|
Dimensions
|
126x65x35mm
|
|
Weight(Not Including Batteries)
|
81g
|
