TES-593 EMF Meter Triaxial Data Logger
Features:
- 10 MHz to 8.0 GHz frequency range.
- For isotropic measurements of electromagnetic fields.
- Non-directional (isotropic ) measurement with three-channel measurement probe.
- High dynamic range due to three-channel digital results processing.
- Configurable alarm threshold and memory function.
- Easy to use
- High frequency (RF) electromagnetic wave field strength measurement.
- Mobil phone base station antenna radiation power density measurement.
- Wireless communication applications (CW , TDMA , GSM , DECT).
- Wireless LAN (Wi-Fi) detection, installation.
- Spy camera, wireless bug finder.
- Cellular/Cordless phone radiation safety level.
- Microwave oven leakage detection.
- Personal living environment EMF safety.
- RF power measurement for transmitters.
Specification:
|
Sensor type
|
Electric field (E)
|
|
Frequency range
|
10MHz to 8.0 GHz
|
|
Directional characteristic
|
Isotropic, 3-dimensional
|
|
Measurement range (CW signal>50MHz)
|
38mV/m to 11V/m
|
|
Absolute error(1V/m and 50MHz)
|
+/-1.0dB
|
|
Frequency response (taking into account typ. CAL factor)
|
+/-1.0dB (50MHz to 1.9 GHz) , +/-2.4dB(1.9GHz to 35GHz)
|
|
Isotropy deviation
|
Type. +/-1.0dB f>50 MHz
|
|
Overload limit
|
4.2W/m2 (40 V/m)
|
|
Temperature response(0 to 50 )
|
+/-1.5dB
|
|
Note
|
Unless otherwise stated, all specifications hold under the following assumptions:
Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 +/-3 ;
relative air humidity 25% to 75%.
|
|
Measurement method
|
Digital , triaxial measurement
|
|
Directional characteristic
|
Isotropic, triaxial
|
|
Measurement range selection
|
One continuous range
|
|
Display resolution
|
0.1mV/m, 0.1 A/m, 0.1 W/m2;, 0.001 W/cm2;
|
|
Setting time
|
Typically 1s ( 0 to 90% of meas. value)
|
|
Display refresh rate
|
Typically 400mS
|
|
Display type
|
LCD 4 digit
|
|
Audible alarm
|
Buzzer
|
|
Measurement units
|
mV/m , V/m , A/m , mA/m , W/m2; , mW/m2; , W/cm2;
|
|
Measurement display value
|
Instantaneous measured value, maximum value or average value since power-on.
|
|
Measurement average time (in per-set steps)
|
4s to 15 minutes
|
|
Measurement alarm function
|
Adjustable threshold with ON/OFF
|
|
Measurement calibration factor CAL
|
Adjustable
|
|
Manual data memory and read storage
|
99 sets ( only recall by meter )
|
|
Battery
|
9V
|
|
Battery life
|
>15 hours
|
|
Accessory
|
9V battery, carrying case & manual
|
Edited by Johnny
