Deep Sea Original Generator Controller DSE5220 Diesel Genset Control Panel Automatic Start Control
The DSE5210 is an Automatic Start Control Module designed to automatically start and stop diesel and gas generating sets that includen on electronic engines. The module also provides excellent engine monit oringand protection features.
The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop, under/ over generator volts, over current, under/ over generator frequency, low/ high DC battery volts, low fuel alarm and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front.
The DSE5220is an Automatic Mains Failure Control Moduleand includes all the features of the DSE5210 plus the ability to monitor a mains (utility) supply.
Upon detection of a mains(utility) failure the module automatically starts the generating set. Once the mains (utility) power has been restored it instructs the generating set to stop.
Both modules include RS232 or RS485 communications capabilitiesfor linking to a PC, sending SMS messages and interfacing with new and existing building management systems.
FEATURES
• Automatic start
• Automatic mains (utility) failure detection (DSE5220 only)
• Automatic load transfer
• Configurable inputs
• Configurable outputs
• Configurable alarms & timers
• Digital inputs
• Analogue inputs
• Back-lit character LCD display
• Engine protection
• Front panel mounting
• PC configurable
• Front panel programming
• Remote monitoring
• RS232 or RS485 remote communications (to be specified on ordering)
• Modbus RTU
• Engine history event log
• LED alarm indication
• LCD alarm indication
• SMS messaging
• Hid till lit alarm icons
• Engine exercise mode
• Magnetic pick-up
SPECIFICATION
DC SUPPLY
8 V to 35 V continuous
CRANKINGDROPOUTS
Able to survive 0V for 50mS, providing the supply was at least 10V before dropout and supply recovers to 5V
STARTRELAY OUTPUT
16A DC supply at supply voltage
FUEL RELAY OUTPUT
16A DC at supply voltage
AUXILIARYRELAY OUTPUTS
5A DC at supply voltage
CHARGE FAIL/EXCITATIONRANGE
0V to 35V
MAXIMUMOPERATINGCURRENT
320mA at 12V,215mA at 24V
MAXIMUMSTANDBYCURRENT
175mA at 12V,95mA at 24V
ALTERNATOR INPUTRANGE
15V (L-N) to 333V AC (L-N) absolute maximum
ALTERNATOR INPUTFREQUENCY
50-60 Hz at rated engine speed (Minimum: 15V AC L-N)
MAGNETIC PICK-UPVOLTAGEINPUTRANGE
+/- 0.5V to 70V Peak
MAGNETICINPUT FREQUENCY
10,000 Hz (max) at rated engine speed
MAINS(UTILITY) SENSINGINPUTRANGE
(DSE5220 only)
15V (L-N) to 333V AC (L-N) absolute maximum
MAINS (UTILITY) SENSING INPUTFREQUENCY
(DSE5220 only) 50-60 Hz
MAINS(UTILITY) & GENERATOR LOADING RELAY OUTPUT (DSE5220 only)
8A AC 250V
MODULEDIMENSIONS (WxH)
240mm x 172mm 9.4” x 6.8”
PANELCUT-OUT (WxH)
220mm x 160mm 8.7“ x 6.3”
MAXIMUMPANELTHICKNESS
8mm
0.3”
